For more than a decade, AS 1851-2012, Routine Service of Fire Protection Systems and Equipment, has been regarded as the benchmark for maintaining fire safety systems in Australian buildings. In many parts of the country, however, it has operated as best practice rather than a strict legal requirement.
That position is changing. In February 2026, New South Wales made AS 1851 servicing mandatory for most commercial and residential buildings, joining other jurisdictions that already reference the Standard in legislation. The message to building owners and Facility Managers nationally is clear: AS 1851 is becoming the legal baseline, and the way fire systems are serviced, recorded and reported is under greater scrutiny than ever.
For Facility Managers in Western Australia, this is the right time to review how your fire protection maintenance is being delivered, and to make sure your buildings would stand up to the same level of scrutiny.
What has changed in New South Wales
From 13 February 2026, owners of Class 1b and Class 2 to 9 buildings in NSW must ensure their essential fire safety measures are inspected and tested in accordance with AS 1851-2012, or with the standard nominated in the building’s performance solution (Building Commission NSW). The requirement sits within the Environmental Planning and Assessment (Development Certification and Fire Safety) Regulation 2021, and was originally due to commence in February 2025 before being deferred by twelve months to give industry time to prepare (Building Commission NSW).
Three aspects of the reform are particularly significant:
- It applies to existing buildings. The obligation applies regardless of when the building was approved or constructed.
- Responsibility rests with the building owner. Owners must ensure measures are maintained to the Standard, which in practice places the onus on those managing the building and engaging contractors.
- Further reform is scheduled. From 13 February 2027 (or earlier, once an accreditation scheme is approved), newly installed fire safety measures must be certified by an accredited person.
The practical effect is that AS 1851 service schedules, records and reports now form the evidence that supports a building’s Annual Fire Safety Statement. If a measure has not been maintained to the Standard, the owner’s compliance position, and liability, is exposed.
A national shift towards AS 1851 as law
NSW is not acting in isolation. Across Australia, fire protection maintenance is increasingly being tied to AS 1851 through legislation, regulation and formal reporting:
- Australian Capital Territory: AS 1851 is referenced as the required maintenance standard under the Emergencies Act 2004 (ACT Fire & Rescue, FSG-05).
- South Australia: Essential safety provisions must be maintained in accordance with Ministerial Building Standard 002, supported by annual certification (SA Metropolitan Fire Service).
- Tasmania: AS 1851 compliance is required under the state’s fire service legislation and regulations (ABLIS).
- Queensland and Victoria: Both impose formal maintenance and annual reporting obligations on fire safety installations and essential safety measures.
The direction of travel is consistent: maintenance standards are being formalised, documentation is becoming the measure of compliance, and accountability is being placed squarely on owners and those who manage buildings on their behalf.
Where Western Australia stands
In Western Australia, there is currently no annual fire safety statement and no state-wide legislation equivalent to the NSW reform. AS 1851 is nonetheless the recognised industry standard for maintaining fire protection systems, and building owners and occupiers remain responsible for keeping their systems properly maintained by competent contractors, with records to prove it.
In short, AS 1851 in WA is currently best practice rather than an explicit legislative mandate. However, the national trend suggests that is unlikely to remain the case indefinitely. Facility Managers who treat AS 1851 as the minimum standard today will be well positioned if, and when, WA follows the lead of other states. Those who have treated it as optional may find significant gaps in their records, their systems, and their budgets.
What this means for Facility Managers
The NSW reform reinforces a principle that applies to every building, regardless of state: fire protection maintenance is only as good as the evidence behind it. For Facility Managers, three implications stand out.
Records are the proof of compliance. Every service, whether monthly, six-monthly, yearly or five-yearly, should be dated, documented against the asset it covers, and readily accessible. When an auditor, insurer, DFES or a prospective purchaser asks for evidence, “we’ll send it later” is no longer an acceptable answer.
Contracts must reflect the Standard. Maintenance contracts should explicitly require servicing to AS 1851, and should be clear about what is included and excluded. Longer-interval services, such as five-yearly hydrant and wet fire system testing, are frequently omitted from standard contracts and must be planned and budgeted separately.
Cutting corners carries real risk. Selecting a contractor on price alone, skipping routines, or accepting incomplete reports may appear to reduce cost in the short term. In practice, it exposes owners and managers to non-compliance, insurance complications, liability in the event of a fire, and costly remedial works when deferred issues finally surface.
Practical steps to take now
Facility Managers can strengthen their compliance position well ahead of any legislative change in WA by taking the following steps:
- Audit your current records. Confirm that service reports for every fire safety measure are complete, current and accessible, both in your online platform and in your on-site logbooks.
- Review your maintenance contracts. Check that they explicitly reference AS 1851 and clearly identify which services, including one-, five-, ten- and twenty-five-yearly routines, are excluded.
- Identify overdue long-interval services. Five-yearly hydrant, sprinkler and wet fire services are among the most commonly missed and can reveal significant hidden defects.
- Plan and budget ahead. Build long-interval services and likely defect rectification into your capital and operational budgets, rather than treating them as unexpected costs.
- Engage a competent, accountable contractor. Choose a provider that services to the Standard, reports transparently, and can demonstrate compliance on request.
Fire protection, the right way: how PFM supports you
At Property Fire Maintenance, we have always serviced to AS 1851 as the standard, not the exception. With more than 20 years’ experience protecting commercial, industrial and strata buildings across Western Australia, we help Facility Managers stay ahead of compliance rather than reacting to it.
Our team can support you with:
- Compliance reviews of your existing service records, logbooks and contracts against AS 1851 requirements
- Full AS 1851 servicing across fire hydrant, sprinkler, wet fire, detection, alarm and portable equipment systems
- Long-interval services, including five-yearly hydrant and wet fire system testing, scoped and quoted as standalone projects
- Defect identification and rectification, with clear reporting and prioritised recommendations
- Transparent, accessible records through our online compliance platform, available whenever you need them
Don’t wait for WA to legislate. The standards being enforced in NSW today are the standards your building should already be meeting. Contact the PFM team or call (08) 9248 1506 to arrange a compliance review of your building.
Install | Inspect | Maintain | Certify
Related articles
Fire Prevention specialist